Can you tune my ls turbo?

ASSISTANCE Forced Induction
1

I am almost finished collecting my turbo kit. I hope to install it before February 10th (birthday). I am looking for someone to tune my car once the new setup is in. I already bought hondata S200 base (needs upgrades) and would like to know if someone could burn a chip for me based on my setup untill I find a place to have it tuned on a dyno. Im in South Carolina and I dont think there are any “real” shops around me. This is what Im doing…

stock ls
Full Race stage 2 kit
hondata
RC 550 injectors
walbro 255 fuel pump
stock ignition(or MSD)
stock timing?

Thanks in advance for any help

2

If it was Uberdata I could, but not Hondata…

There are a few asshats I wouldnt ever recommend on H-T in your area for Hondata though.

3

xenocron, I will use uberdata if you can help me out.
thats why I only bought the base hondata cause I had a feeling I would have trouble finding a tuner. So what do I need to use Uberdata? I have done no research on it cause the turbo guide says hondata is the way to go. Thanks

4

I did hear some names on ht (i had to look once you said that)Can you give me some insight to why I should avoid hondata in my area?

5

I emailed you back about the tuners.

As far as Uberdata…you dont need a whole lot. Just patience and willingness to learn really. You will really get a sense of accomplishment when you can efficiently tune in your own car.

I recommend this write-up by Keebler65:
http://home.mn.rr.com/keebler65/honda/uberdata.html

Make sure you go back and read some of his other write-ups as well. Then check out the Uberdata forums as well:

http://www.ecimulti.org/uberdata

6

This is the guy JDogg I told you about in the email. I believe he tunes Hondata as well.

http://www.honda-tech.com/zerothread?id=919712

7

Thanks a lot for the help. I will look further into uberdata, I would like to be able to tune myself(expensive with hondata) Time to search! Thanks again youve been a great help.

8

xenocron, I’m looking forward to going to you on my turbo project! I don’t trust anyone else locally so I would send u my ecu very soon.

9

thanks! let me know when its on the way :slight_smile: