so would a 205-55-16 inch Azenis fit on a 16X7 inch wheel? i’m looking for some tires for for 16’s and would really like to get Azenis. Comments are more than welcome!!!
They would “fit” but it would have a really large diameter. You’re best bet would be 215/45-16
im using 205/45/16 on my 16x7
i belive its the closest to stock
i think for azenis
205/50/16 will work good?
Teg92 is right; a few of the So Cal members are running 215/45ZR16. I don’t think there is a 205/50r16 in the Azenis. These are the choices that I found from Falken’s website:
195/60R14
205/50R15
205/55R16
215/45ZR16
225/45ZR17
245/45ZR17
Theorictically, the 215/45ZR16 would be about an inch or so taller than the stock overall diameter of a 195/60r14
Sorry to whore the thread, but will the 215’s rub on the fenders walls on the front tires?
yeah i was thinking about that too. because my 15x7 comp-lites are pretty close to rubbing and i have 205-50-15’s on them. anyways, thanks for all the replys… :bump:
It depends on the offset. I had 215/40r17 tires on 17x7 wheel with +41 offset and the tires only rubbed at full lock to either side.
the 205/55/16 azenis will fit on a 16x7 wheel. one of my sets of wheels are 16x7.5 +43 offset and im dropped on neuspped race springs @ -3.0f and -3.5r camber and the 205/55/16 fit fine. althought the rear is so close you can barely even put a #2 pencil between the tire and fender. its close, but yes it will fit. and there is a few members using the 215-45-16’s with no problems aswell. just depends on the wheel width/offset and how low the car is. HTH